PILZ Servo Motors PMC EZ – Compact and Powerful

DCS PILZ Servo Motors PMC EZ 1 400

 November 29, 2021

 

Implement numerous applications with the servo motors PMC EZ. Their compact design is a convincing feature, also making them ideal for space-critical applications. What’s more you benefit from high dynamics and low cogging torques. The servo motors PMC EZ are suitable for use with the multi-axis system PMC SI6 and the compact system PMC SC6.

Shared power and encoder interface thanks to one cable solution

PILZ’s servo motors PMC EZ are also available in a version with just one shared power and encoder interface. In this case it has a twistable plug-in connector with quick lock. With this type, the connection services between the encoder and drive controller are carried in the motor’s power cable. By saving on the encoder cable, the wiring work is reduced considerably, as is the space requirement in the drag chain.

DCS PILZ Servo Motors PMC EZ 3 400

 

Unrivalled benefits of the servo motors PMC EZ

  • Powerful and robust for a wide range of different application areas
  • High power density due to the very compact design
  • Extremely smooth running and high process quality due to the low cogging torques
  • Maximum cycle rate/machine output thanks to the highest dynamics
  • Best heat dissipation generates permanently high performance
  • High-resolution absolute value encoder systems for maximum control quality and absolute positioning
  • Ideal for use with on-board axes and in cramped conditions
  • Energy saving due to high efficiency factor

 

Features of the servo motors PMC EZ

DCS PILZ Servo Motors PMC EZ 4 400

  • Optical or inductive measurement principle
  • High system accuracy with up to 23-bit resolution
  • Up to 4096 recordable revolutions in multiturn design
  • Electronic nameplate for fast, safe commissioning
  • Additional information transferred with the position value (EnDat® 2.2)
  • Twistable plug-in connector with quick lock
  • High temperature resistance
  • High vibrations and shock resistance

 

Choose the right servo motor PMC EZ for use with the servo amplifiers PMC SI6 and PMC SC6. For more information, click here

 

 

Related Articles

Safety Light Curtains PSENopt II From Pilz: World’s First UL-Certified Type 3 Light Curtain for USA and Canada – Opening the Market for Type 3

Safety Light Curtains PSENopt II From Pilz: World’s First UL-Certified Type 3 Light Curtain for USA and Canada – Opening the Market for Type 3

Type 3 PSENopt II safety light curtains have successfully undergone the certification process of UL, a major global safety science company. UL certification supports companies and users as they launch their products and systems on to the North American market.

 

 

 

|

New Operation Element PIT oe ETH with Activatable Ethernet Port Can Be Used for Security – Secure and Flexible Operation

April 9, 2024 Pilz adds the operation element PIT oe ETH to its portfolio of control and signal devices Pilz adds the operation element PIT oe ETH to its portfolio of control and signal devices. PIT oe ETH has an activatable Ethernet port, thus protecting freely accessible industrial Ethernet interfaces from improper access. As such…

| | | | | |

Ethernet-APL is Ready, Endress+Hauser to Begin Rollout of Compatible Devices

May 24, 2023 Following on the success of a multi-partner load-testing program, Endress+Hauser is launching a full portfolio of Ethernet-APL measuring devices based on the PROFINET protocol. Expectations in the process sector for this new advanced physical layer are enormous, and the load testing results confirm the technology’s potential as a game-changer in industrial communication….

New Premium Sine Seal Oil Seal

New Premium Sine Seal Oil Seal

 

Oil seals in today’s production systems are subject to increasingly challenging conditions and requirements. Our gear units, and therefore the sealing systems, are used in machines that run at variable speeds or at continuous duty and therefore cause the temperatures in the drive system to fluctuate. The pressure inside the gear unit also varies according to the capacity utilization.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…