|

More WEG CFW500 High-Performance and Washdown Duty AC Drives from AutomationDirect

January 20, 2023

CFW500

AutomationDirect has extended its line of WEG CFW500 high-performance AC drives to include more horsepower options. With this addition, the high-performance horsepower ratings have been expanded all the way up to 150hp.

Also added are new higher current high-performance 10hp drives as well as 10hp washdown rated IP66/NEMA 4X models. A full range of supporting accessories is also included with this launch.

The new WEG CFW500 drives start at $826.00.  All WEG CFW500 VFDs and accessories come with a one-year warranty.

More about CFW500 high-performance AC drives

Related Product

WEG Electric Motor Controls from Automation Direct

The WEG Electric CWB series of IEC contactors meets the requirements of a wide range of industrial applications. The magnetic contactors are available with AC or DC coils, in ratings up to 60hp at 575V. RW27/67 series thermal overload relays include (1) N.O. and (1) N.C. isolated auxiliary contact, and mount directly to the compatible contactor for compact and reliable installation. RW-E series electronic overload relays protect motors in a wide range of applications by offering selectable trip classes. WEG CWB series contactor prices start at $25.75, with a full line of accessories available.

Related Articles

DCS Additional Safety Mats Edges and Bumpers from AutomationDirect 1 400

Additional Safety Mats, Edges, and Bumpers from AutomationDirect

 

AutomationDirect has added additional safety mats, edges, and bumpers from ASO Safety Solutions. These safety products protect people and machinery from harm. Mats detect the presence of personnel on horizontal surfaces (usually the floor), edges can be used on any surface, usually near possible crushing or shearing points, and bumpers are used in applications involving vehicles or other moving equipment.

 

Single Phase Motor Delivers 30 HP of Unity Power Factor from Utility Service

Single Phase Motor Delivers 30 HP of Unity Power Factor from Utility Service

Single Phase Power Solutions introduces the 30 HP Belle Single-Phase Motor which uses Written-Pole technology to deliver clean 230V or 460V three-phase output from readily-available single-phase utility services. The utility-friendly starting and operating characteristics provided through the use of Written-Pole technology minimize voltage sags and flicker on long single-phase distribution lines.

 

 

 

|

Product Manager Minute: Pro 2 Power Supply Family

January 31, 2023 Wago’s Pro 2 Power Supply Family Power supplies are the heart of any control panel. James Lubow, our new Product Manager for Electronic Interface, discusses the different options WAGO’s Pro 2 can give to your application in this Product Manager Minute. More Information EPSITRON® COMPACT power supply EPSITRON COMPACT Power Supply from…

DCS SEW EURODRIVE New Screw Conveyor Drive 1 400

The New SEW-EURODRIVE Screw Conveyor Drive Is Ready to Be Put to Work!

 

SEW’s re-designed screw conveyor now boasts a 50% higher axial load capacity, labyrinth sealing technology, and design features for ease of maintenance. Using the SEW shaft removal tool, even the most stubborn shaft can be removed with little effort. Gear unit and seal maintenance is steamlined, as the sealed CEMA flange takes the screw load while the gear unit is removed, minimizing the need for trough access and screw removal. All of these features coupled with the proven and reliable SEW gearmotor, make the new SEW screw conveyor drive an ideal solution for bulk material handling applications.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • How to Select the Correct Data Cable for Your Industrial Application

    July 18, 2024 In this article, you will learn what the most common mistakes are when selecting Industrial Ethernet and bus cables and how to avoid them. All cables and wires that contribute to communication in any way are commonly referred to as data cables. However, there are significant differences such as the multitude of… Read More…

  • Legacy OT Risks: The Hinderances of Aging Systems – and How to Move Forward

    July 15, 2024 Today, the role of a chief information security officer (CISO) comes with a heavy ethical and social responsibility. Yes, we and our teams have a primary responsibility to protect the cybersecurity of critical infrastructures that provide vital services like electricity, water, oil, gas, healthcare, and food production, to name a few. As… Read More…