Teco Westinghouse RL Line/Load Reactors Solve Line and Load Power Quality Problems

MTE Reactors 400

March 18, 2019

Teco Westinghouse’s RL Line/Load Reactors are best-in class power quality units with a long history of proven performance. Rugged and robust, they are unequalled in absorbing power line disturbances that can damage or shut down variable frequency drives (VFDs) and other sensitive equipment.

They work on both the line side and load side to give you an easy solution that reduces nuisance tripping, reduces harmonic distortion and minimizes long lead effects.

Features:

  • 1 to 1,500 Amp Current range
  • 208V to 690V, 50/60Hz, 3-Phase
  • Available for use on Single Phase Input
  • Epoxy Impregnated
  • High Saturation Current Rating
  • For use on VFD Systems with Switching Frequencies up to 20kHz
  • 150% O/L Rated
  • Protects Motors from Long lead Lengths
  • Reduce Output Voltage dV/dT
  • Virtually Eliminate Nuisance Tripping
  • Extended Semiconductor Life
  • Transient Protection Options Available
  • Reduce Motor Temperature
  • Reduce Motor Audible Noise
  • Available in Chassis Style, NEMA 1 and NEMA 3R
  • UL, cUL, CSA and CE Approved

Go HERE for more information

Related Articles

B&R Automation: Cost-effective motor/valve control

B&R Automation: Cost-effective motor/valve control

B&R’s new digital output module X20DO4332-1 has integrated pulse width modulation and is a cost-effective alternative to motor modules. In addition, the module offers a dither function that prevents valves from sticking. Pulse width modulation (PWM) is mainly used for controlling larger loads, such as motors. Instead of using electronics to regulate a continuous input voltage down to the desired motor voltage, the motor is controlled by the width of the switching pulses.

 

 

 

|

Mitsubishi Electric Automation, Inc. Introduces Powerful iQ-R Series Module Allowing Users to Configure Two Networks Using One Module

The newly introduced iQ-R Series CC-Link IE TSN Plus module allows dual network communication, easy configuration, simple diagnostics using one software environment, simplified wiring, and much more March 20, 2023 Mitsubishi Electric Automation, Inc. announces the iQ-R Series CC-Link IE TSN Plus module which supports CC-Link IE TSN and EtherNet/IP™ networks in one module. CC-Link…

One Basic Device, Three Frequencies: Pepperl+Fuchs Presents a New, Modular RFID Handheld for Industrial Environments

One Basic Device, Three Frequencies: Pepperl+Fuchs Presents a New, Modular RFID Handheld for Industrial Environments

 

The introduction of the new, modular IC-HH5* RFID handhelds, means Pepperl+Fuchs is now offering a portable and highly flexible solution for writing and reading different frequency RFID transponders. The latest addition to the industrial automation product range boasts an especially user-friendly design and high-performance hardware. 

 

|

Appleton PlexPower Reduces Total Cost of Ownership of Industrial Motor Starters

PlexPower™ motor starters are faster to install, require less maintenance, and easier to operate than traditional cast motor starters January 30, 2023 The Appleton PlexPower is a cost-effective, easy-to-install, and simple-to-operate alternative to traditional cast and bolted motor starters. Appleton PlexPower motor starters deliver savings of up to 73% compared to the total cost of ownership of…

HARTING interface supplies Power, Data and Signals for the “metroSNAP“

HARTING interface supplies Power, Data and Signals for the “metroSNAP“

HARTING is taking the next step in the direction of the mobility concepts of tomorrow with the Rinspeed “metroSNAP”. Whether passenger transport or freight logistics, the metroSNAP can be used in highly versatile manner. The HARTING module helps the driver use the vehicle for a wide range of tasks in a fast, flexible manner. Like its predecessors — the “SNAP” and “microSNAP” — the vehicle is divided into two elements. On the one hand, there is the Skateboard that serves as an optimised electric vehicle, and on the other there is the “Pod”, which can be switched out in flexible manner to accommodate different tasks.

 

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • 2023 Innovations from Festo at CMTS: CMMT-MP and CPX-AP-A

    September 22, 2023 By Krystie Johnston Festo is a leading supplier of pneumatic and electrical automation technology. The company tirelessly innovates products and solutions to improve operations for factories and process automation. Festo’s 2023 innovations include their CPX-AP-A remote I/O, CMMT MP servo drive, and their portfolio of productivity tools. Festo’s New CPX-AP-A: One Integration… Read More…

  • The Fundamentals of Machine Vision in Automation: What You Need to Know

    September 15, 2023 Machine vision has a place in many industries, including food & beverage, automotive, semiconductor, life sciences, and more. In this article, Ryan Marti, Product Manager – Industrial Cameras at Omron Automation walks us through the fundamentals of machine vision in automated processes and holds a lens to look at Omron’s products and… Read More…