New SEW-EURODRIVE Industrial Gear Units To Go

DCS SEW EURODRIVE Industrial Gear Units To Go 1 400

February 22, 2022

In addition to robustness, individuality and high torque, industrial gear units are often associated with long delivery times. We are now bringing an end to these long delivery times. Our delivery time offer ATO 5 is now joined by ETO 15. For you, we will be faster and deliver your solution promptly – whether from our modular system or with customer-specific adaptations.

A delivery time program that has everything covered

This is very good news for design engineers, purchasers, maintenance staff and anyone who is in a particular hurry – whether they work in plant planning, machine design, project purchasing, in the service workshop or on the construction site. Our industrial gear units now get to you even faster, getting your application up and running in no time.

This is made possible by out to-go program with:

 

Industrial gear units assembled in only 5 working days

ATO 5 – Assemble-To-Order: All ATO 5 industrial gear units from SEW-EURODRIVE’s proven modular system leave our Bruchsal large gear unit plant just 5 working days after your order at no additional cost.

The standard helical and helical-bevel gear units of Generation X.e in sizes up to 175 kNm and the standard planetary gear units of the P series up to 360 kNm are available as ATO 5 products – including almost all options.

It hardly gets any faster than this! Unless you have an emergency: Should your machine ever come to a standstill, we can ship the replacement gear unit to you after just one working day. That is maximum flexibility and operational reliability for all those who are in a hurry.

Industrial gear units modified in only 15 working days

ETO 15 – Engineer-To-Order: Many gear units require customer-specific modifications, such as special output shafts, housing rework and preparations for use at low temperatures or special piping. With ETO 15 – the program for shortened delivery times – we can now also deliver modified industrial gear units of the X.e and P series even faster.

Also available here are the modified industrial gear units based on the standard helical and bevel helical gear units of Generation X.e in sizes up to 175 kNm and the standard planetary gear units of the P series up to 360 kNm.

But we can also deliver individual solutions, completely customer-specific, outside our modular system after only 15 working days.

DCS SEW EURODRIVE Industrial Gear Units To Go 2 400

 

 

 

 

To learn more abut SEW-EURODRIVE’s Industrial Gear Units to go, click here 

 

Related Articles

New Thermal Videoscope Kits with Specialty Probe Options FLIR VS290™

New Thermal Videoscope Kits with Specialty Probe Options FLIR VS290™

 

The FLIR VS290 is an industrial thermal and visual videoscope system designed to help professionals quickly and safely find hidden faults and dangers in difficult-to-access locations. Featuring a 160 × 120 true thermal imager and FLIR MSX® (VSC-IR32 and VSC-IR33 probes), VS290 videoscopes give users the power to see and measure invisible hot spots before catastrophic equipment failures can occur. The small, sleek tips allow for easy inspection through tight or confined openings, improving productivity and reducing diagnostic time. 

 

Achieve the Next Level of Energy Efficiency With ABB’s New Baldor-Reliance EC Titanium Integrated Motor Drive
|

Achieve the Next Level of Energy Efficiency With ABB’s New Baldor-Reliance EC Titanium Integrated Motor Drive

Motor standards have been in place for decades, yet there is a growing demand to achieve greater efficiencies as regulations continue to tighten on the total system for fans, pumps and compressors. Equipment manufacturers are turning to new motor technologies to achieve the highest system efficiency possible from wire to air while using sustainable materials.

 

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • The Drive Towards Energy-Efficient Data Centres

    April 17, 2024 By Shahrukh Ashhar Data centres are the backbone of our digital world. They serve as the foundation for various online activities like streaming, e-commerce, and website/app usage. In today’s tech-driven world, our attention is actively captured by our online activities, all of which heavily depend on data centres. The demand for storage… Read More…

  • ABB’s Expansion Joint System Helps Expand Sustainable Transportation Possibilities

    How two feet is helping connect Canada’s new automated light rail transit network April 17, 2024 Engineering ingenuity for robust infrastructure ABB is proud to have designed and produced the expansion joint system used on the Champlain Bridge section of the REM, Montreal. Canada is considered to have one of the best developed infrastructures in… Read More…