MELTRIC Announces New Product Release of DSN100 Plug and Receptacle

DCS MELTRIC Announces New DSN100 Plud and Ply Receptacle 1 400

April 19, 2022

 

MELTRIC recently announced DSN100, a new 100 A plug and receptacle. This new model is a Switch-Rated, 100 A, 600 VAC plug and receptacle fitted with DECONTACTORTM technology for peak performance and user safety. MELTRIC’s DECONTACTORTM Technology allows their Switch-Rated plugs and receptacles to be safely connected and disconnected under full load, up to 200A and 100 hp, in wet or dry conditions. They combine the safety and functionality of a disconnect switch with the convenience of a plug and receptacle in one device.

 

Features and benefits of DSN100 include:

  • •100 Amp, 600 VAC
  • •Horsepower Ratings of:
    • •5 hp @ 120 V 1Ø
    • •10 hp @ 240 V 1Ø
    • •20 hp @ 208 V 3Ø
    • •20 hp @ 240 V 3Ø
    • •50 hp @ 480 V 3Ø
    • •50 hp @ 600 V 3Ø
  • •Type 4X/IP69/IP69K environmental ratings

 

The DSN100 will be available starting April 19, 2022. Contact your local representative for specific pricing. For more information on this new product, click here 

 

 

Related Articles

DCS Phase and Voltage Monitoring Relays from Automation Direct 1 400

Phase and Voltage Monitoring Relays from AutomationDirect

 

AutomationDirect has added new phase and voltage monitoring relays from ProSense. The PMRU-2C series true RMS phase monitor relays protect 3-phase equipment from damage that can occur when there is a phase loss, phase reversal, phase unbalance, undervoltage, or overvoltage condition. These relays are designed to provide protection for most generator systems and applications that use non-sinusoidal waveforms. With non-sinusoidal waveforms, the true RMS voltage measurement ensures accurate sensing, eliminating nuisance tripping.

 

B&R Automation: Vertical Mounting Saves Space

B&R Automation: Vertical Mounting Saves Space

B&R’s intelligent track system SuperTrak is now available in a vertical-mount variant. This helps to optimize the output per square meter of floor space. If products are only transported on the upper side of the SuperTrak, the weight is not supported magnetically. Instead the load is transferred directly to the rollers. The shuttles have a much higher payload capacity.

 

 

 

|

Open For the Future with u-OS from Weidmüller

The flexible operating system for Industrial IoT and Automation August 11, 2023 Your operating system for Industrial IoT and Automation u-OS is the new, open operating system from Weidmüller. It combines automation with the possibilities of the Industrial IoT in just one device and is suitable for edge computing solutions. It enables efficient data pre-processing…

SEW Eurodrive MOVIGEAR Mechatronic Drive System

SEW Eurodrive MOVIGEAR Mechatronic Drive System

 

The MOVIGEAR mechatronic drive system is designed for flexible use across various communication infrastructures. This makes it ideal for decentralized applications in the field. With its compact design and optimal integration of components with permanent-field synchronous motor, gear unit, and integrated electronics, MOVIGEAR is especially tailored for efficient use in the general materials handling sector.

 

 

MC Nidec DEvelops AC Servo Motor Equipped with Zignear 1 400

Nidec Develops AC Servo Motor Equipped with Zignear®, the Location Detection Technology that Accommodates 17-bit Resolution, for the Industrial Robot Market

 

Nidec Corporation recently announced that it and Nidec Sankyo Corporation have jointly developed an AC servo motor (resolution: 17bit) equipped with Zignear®, the position detection technology that can be applied to industrial robots and replace encoders.

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • How to Select the Correct Data Cable for Your Industrial Application

    July 18, 2024 In this article, you will learn what the most common mistakes are when selecting Industrial Ethernet and bus cables and how to avoid them. All cables and wires that contribute to communication in any way are commonly referred to as data cables. However, there are significant differences such as the multitude of… Read More…

  • Legacy OT Risks: The Hinderances of Aging Systems – and How to Move Forward

    July 15, 2024 Today, the role of a chief information security officer (CISO) comes with a heavy ethical and social responsibility. Yes, we and our teams have a primary responsibility to protect the cybersecurity of critical infrastructures that provide vital services like electricity, water, oil, gas, healthcare, and food production, to name a few. As… Read More…