| |

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

November 26, 2024

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

ANCA’s advanced grinding solutions offer seamless finished tool grinding in a single setup, including blank preparation. This setup features the P-axis Arobotech, which supports blanks at the grind point, enabling the efficient production of various tools with a surface finish below 0.2 Ra. This process significantly reduces cycle time while boosting productivity. The 3000 RPM headstock on the MX7 platform further enhances performance, allowing the tool to spin at optimal speeds for this application.

The MX7 platform, equipped with six wheel packs as recommended by ANCA’s application team, supports the grinding of various tool shapes in a single setup, eliminating the need for wheel changes. Depending on the tool’s shape and geometry, grinding can be performed at either the 3 or 12 o’clock position. Additionally, a specially designed hydraulic pump controls the clamping pressure based on diameter, including up/down pressure, to achieve faster cycle times. Key benefits include:

  • Tool diameter range: 1mm to 25.4mm
  • Capability to handle small to large diameter taper ballnose, corner radius, lollipop cutters, step tools, and more in a single setup – reducing cycle time and enhancing productivity and accuracy
  • Short setup time due to Arobotech support
  • Arobotech pads can support a range of diameters: 3 to 10mm, 10 to 16.5mm, and 16.5 to 25mm, all in a single setup
  • Collet changes supported within the diameter range
  • A proven blanket grinding process, well-established in the market
  • All these features are supported on the MX7 ULTRA, offering improved surface finish, stability, and accuracy

This application is versatile, working not only with sized blanks but also with bar stock loading.

ANCA’s Peel Grinding Solution: From Blank to Finished Tool in a Single Setup on the MX7 Platform

Bar stock loading, commonly known as “blanket grinding,” involves the automatic loading and grinding of multiple tools from a single blank. This process is ideal for batch production of endmills, drill heads, and similar tools. Its uniqueness lies in the ability to part off completed tools from the blank and then extend the blank from the collet to grind subsequent tools.

ANCA’s LoaderMate software is designed to manage the number, location, and length of blanks in the pickup pallet, allowing for varying blank diameters per row. It also features a used bar report, detailing the number of tools ground and the total length of bar to be scrapped for each blank.

Source

More Information

For more information, visit www.anca.com or contact your local ANCA representative.

Related Story

ANCA Celebrates 50th Anniversary and Contributions to the High-Precision Tool-Cutting Industry

ANCA was founded by Pat Boland, an Electrical Engineer, and Pat McCluskey, an Industrial Electronics Engineer in 1974, in Melbourne Australia. For 50 years, the company expanded globally. Today they employ over 1200 people worldwide and serve customers in more than 46 countries. Pat Boland, co-founder of ANCA, discusses this journey and some of the innovations they have contributed to the high-precision tool-cutting industry.

Related Articles



Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More



Latest Articles

  • Trapezoidal vs Sinusoidal Servo Brushless Amplifiers

    December 4, 2024 Servo brushless amplifiers are critical components in motion control systems, providing precise regulation of brushless motors for torque, velocity, and position. The two most common types of brushless amplifiers, trapezoidal and sinusoidal, differ significantly in their operation and performance characteristics. This paper provides an in-depth comparison of these amplifier types, outlines their… Read More…

  • HARTING: Industrial Connectivity Made Possible

    December 4, 2024 By Krystie Johnston Proven connectivity solutions are necessary for multiple industrial environments and mission critical applications. HARTING has set the gold standard in connectivity by delivering these solutions and pushing performance since 1945. The connectors that join industrial technology to data and power are particularly important. They ensure that communication and energy… Read More…