|

Liquid-Tight Cordgrips (Nylon) 1427NCG Series from Hammond Manufacturing

June 24, 2025

Liquid-Tight Cordgrips (Nylon) 1427NCG Series from Hammond Manufacturing

Available in black or grey, the new 1427NCG Series from Hammond Manufacturing are liquid-tight corgrips made from nylon. They can be used wherever the cable is entering or leaving an enclosure. Due to a large opening and nitrile rubber (NBR) seal, the 1427NCG Series of crodgrips accepts a range of cable diameters. Designed from NEMA Type 4, 4X, 6, 6P, 12, and 13 enclosures, they provide protection to IP68.

Features of the new 1427NCG Series:

  • Liquid-tight cordgrip made from nylon
  • Available in black (RAL 9005) or gray (RAL 7035).
  • Used where cable is entering or leaving an enclosure.
  • Accepts a wide range of cable diameters due to large opening and NBR (nitrile rubber) seal.
  • The strain relief elements tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Use the cordgrip with the smallest maximum diameter that will fit your application (see table below).
  • Nylon locknut and EPDM o-ring included (as shown).
  • Operating Temperatures:
    • Static state: -40°C to 100°C (up to 120° instantaneous)
    • Dynamic state: -20°C to 80°C (up to 100° instantaneous)
  • Designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 – Protection to IP68.
  • UL94-V2 flammability rating.
  • UL listed.

Source

Related Product

Liquid-Tight Cordgrips (Nickel Plated Brass) 1427BCG Series from Hammond Manufacturing

The new 1427BCG Series from Hammond Manufacturing are liquid-tight corgrips made from nickel plated brass. They can be used wherever the cable is entering or leaving an enclosure. Due to a large opening and nitrile rubber (NBR) seal, they accept a range or cable diameters. Designed from NEMA Type 4, 4X, 6, 6P, 12, and 13 enclosures, they provide protection to IP68.

Related Articles

|

Anybus Achieves Maturity Level 3 Certification in IEC 62443-4-1 Industrial Cybersecurity Standard

February 15, 2024 HMS Networks, a global leader in industrial network communication solutions, announces that its Anybus brand has successfully attained Maturity Level 3 (ML3) certification in the International Electrotechnical Commission (IEC) 62443-4-1: Secure product development lifecycle requirements, an industrial cybersecurity standard. Independently audited by TÜV Rheinland, a globally recognized testing service provider, this achievement…

SEW-EURODRIVE: ATO5 – Industrial Gear Units to Go

SEW-EURODRIVE: ATO5 – Industrial Gear Units to Go

Powerful and robust industrial gear units are often associated with customized solutions and – for technical reasons – rather long delivery times. SEW-EURODRIVE is putting an end to this with the ATO5 range: The industrial gear units without design modifications – i.e. “Assemble-To-Order” – leave the factory just 5 working days after being ordered and and make their way to the place of use.

 

 

 

DPDM Multimount: Festo’s smallest, lightest and easiest-mounting compact cylinder

DPDM Multimount: Festo’s smallest, lightest and easiest-mounting compact cylinder

The new DPDM Multimount compact cylinder is Festo’s smallest, lightest and most economical choice yet in its class. It’s ideal for many applications compact cylinders perform, such as stopping or stabilizing small work pieces or work platforms in light manufacturing. It’s noticeably smaller than Festo’s widely used DMM compact cylinder and unique for the variety of ways it can be fastened in place directly. It can be mounted at the front or rear, vertically or horizontally, hence the “Multimount” in its name.

 

 

 

|

Ex9QR5 – Solid State Reduced Voltage (SSRV) Starter

September 19, 2023 Noark’s Ex9QR5 SSRV Motor Starter is designed to facilitate soft-start and soft-stop of three phase electric motors. It provides the overload protection required for motor branch circuits, while also saving energy, reducing peak-demand charges, and limiting mechanical wear and damage to connected machinery. Ex9QR5 Ratings: Ex9QR5 Features: Motor Protection Functions: What Challenges Does…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles