Liquid-Tight Cordgrips (Nickel Plated Brass) 1427BCG Series from Hammond Manufacturing
June 24, 2025
The new 1427BCG Series from Hammond Manufacturing are liquid-tight corgrips made from nickel plated brass. They can be used wherever the cable is entering or leaving an enclosure. Due to a large opening and nitrile rubber (NBR) seal, the 1427BCG Series of cordgrips accepts a range of cable diameters. Designed from NEMA Type 4, 4X, 6, 6P, 12, and 13 enclosures, they provide protection to IP68.
Features of the 1427BCG Series:
- Liquid-tight cordgrip made from nickel plated brass
- Used where cable is entering or leaving an enclosure.
- Accepts a wide range of cable diameters due to large opening and NBR (nitrile rubber) seal.
- The strain relief elements tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
- Use the cordgrip with the smallest maximum diameter that will fit your application (see table below).
- Locknut and EPDM o-ring included (as shown).
- Designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 – Protection to IP68.
- -40C to + 100C working temp with a temporary heat resistance up to 120C.
- UL listed.
Related Product
Liquid-Tight Cordgrips (Nylon) 1427NCG Series
Available in black or grey, the new 1427NCG Series from Hammond Manufacturing are liquid-tight corgrips made from nylon. They can be used wherever the cable is entering or leaving an enclosure. Due to a large opening and nitrile rubber (NBR) seal, the 1427NCG Series of crodgrips accepts a range or cable diameters. Designed from NEMA Type 4, 4X, 6, 6P, 12, and 13 enclosures, they provide protection to IP68.
