| |

WAGO’s New IO-Link Converter

January 11, 2024

WAGO’s New IO-Link Converter

IO-Link Converter

WAGO’s new IO-Link Converter is a 4-20 mA analog input with a digital display incorporating analog signals into a digital communication network for sensors and actuators from the field into an IO-Link-capable system.

The Analog/IO-Link Converter provides an economical, compact solution for easily incorporating conventional analog sensors and actuators into an IO-Link-capable system like the WAGO I/O System Field, depending on their type. This allows reliable, cost-effective, interference-immune acquisition and output of analog signals. Digital communication can easily be introduced (retrofitted) when old systems are modernized. The converter can be configured directly on the device via IO-Link. A compact design, IP67 protection and the high operating temperature range make the Analog/IO-Link Converter ideal for automation without control cabinets.

The product is used for evaluation of an analog signal, a connected sensor or another device with an analog output. The product has one analog current input and two outputs. Output 1 is digital, and output 2 can optionally be used as analog current output.

The product can be operated in stand-alone mode and IO-Link mode.


  • Decentralized display, preprocessing and conversion of analog signals

Use as an IO-Link device:

The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation.

The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation.

Use as a stand-alone device without IO-Link:

The device compares the measured current value with the set parameters and switches the output according to the selected function.

This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.


More Information


Related Product

WAGO’s New Basic Controller 100 Joins the WAGO-I/O-System

WAGO’s new Basic Controller 100 joins the WAGO-I/O-System. Programmed with CODESYS 3.5 engineering software, they can be configured using web-based management with most any browser and are ideal for large volume and price sensitive control applications.

Related Articles

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…