| |

WAGO’s New IO-Link Converter

June 18, 2024

WAGO's New IO-Link Converter

WAGO’s new IO-Link Converter is a 4-20 mA analog input with a digital display incorporating analog signals into a digital communication network for sensors and actuators from the field into an IO-Link-capable system.

Application:

Decentralized display, preprocessing and conversion of analog signals

Use as an IO-Link device:

The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation.

The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation.

Use as a stand-alone device without IO-Link:

The device compares the measured current value with the set parameters and switches the output according to the selected function.

This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.

More Information

WAGO’s new IO-Link Converter

Related Story

SMD PCB Terminal Blocks from WAGO

Reduced to the essentials, WAGO’s new 2065 Series SMD PCB Terminal Block provides the industry’s greatest termination capability in an ultra-compact footprint. Just 2.7 mm (1.063 inch) tall, the compact 2065 Series accommodates conductors from 24 to 18 AWG (0.2 … 0.75 mm², solid and fine-stranded).

Related Articles

|

DC Energy Meter with Ethernet- Ideal for EV Fast Chargers – from Carlo Gavazzi

October 30, 2024 Carlo Gavazzi is pleased to announce their new and innovative DCM1 Energy Meter with Ethernet which is aimed at the emerging and growing DC metering requirements in Fast Chargers for Electric Vehicles. EV charging applications today are mainly based on fast, ultra-fast, and hyper-fast chargers, and Carlo Gavazzi continues to develop innovative and flexible…

| |

Optimum Control Cabinet Lighting Supports Safe Working and Prevents Wiring Errors

February 25, 2025 Enclosure lights from Phoenix Contact provide optimum lighting for your control cabinet Phoenix Contact is extending its portfolio with the new universal AC enclosure lights with integrated socket. The lights in the PLD E 708 product family cover a wide range of applications in almost all control cabinets worldwide. This is due…

| | |

igus® Cable Carriers Promote Efficiency in Autonomous Hospitality Robot

September 6, 2024 igus® has supplied its E2.10 series of e-chain® plastic cable carriers as part of JEEVES, an autonomous robot from Robotise Technologies that can autonomously navigate its environment and replace up to 300 hotel minibars. Constructed from high-performance plastics, the igus® cable carriers are critical to the robot’s performance, guiding the system’s energy and data…

DCS MELTRIC Announces New DSN100 Plud and Ply Receptacle 1 400

MELTRIC Announces New Product Release of DSN100 Plug and Receptacle

 

MELTRIC recently announced DSN100, a new 100 A plug and receptacle. This new model is a Switch-Rated, 100 A, 600 VAC plug and receptacle fitted with DECONTACTORTM technology for peak performance and user safety. This technology allows their Switch-Rated plugs and receptacles to be safely connected and disconnected under full load, up to 200A and 100 hp, in wet or dry conditions. They combine the safety and functionality of a disconnect switch with the convenience of a plug and receptacle in one device.

 

| |

Powerful EDGE Gateway and Controller with DALI-2® Submaster

August 1, 2024 Powerful EDGE Gateway and Controller with DALI-2® Submaster Carlo Gavazzi is excited to introduce their Powerful UWP 4.0 Series EDGE Gateway/Controller and DLI-MCG024 Series DALI-2® Submaster. In its 2 DIN compact size, the UWP 4.0 provides a comprehensive solution for gathering information from our broad range of power/energy meters and sensors – storing…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • Safety and Security in Transformation

    March 18, 2025 Your route to safe, compliant machinery No Safety without Security! In the connected world of automation, Safety and Security are now a unit: one is no longer possible without the other. The networking of production and industrial plants and new normative requirements mean we are in the midst of a change process.  … Read More…

  • Industry Insights: February 2025 – Navigating Economic Uncertainty

    March 18, 2025 As we enter 2025, Canadian industries are facing a rapidly shifting economic landscape shaped by fluctuating trade policies, rising costs, and ongoing supply chain disruptions. From industrial manufacturing to technology and energy, businesses are adjusting their strategies to remain competitive in the face of uncertainty. Despite economic pressures, Canada’s industrial sectors are… Read More…