Littelfuse ITV4030 Battery Protectors Provide Fast Response to Prevent Overcurrents and Overcharging Damage

DCS Littlefuse ITV4030 Battery Protectors 1 400

 May 16, 2022

 

 

Littelfuse Inc., an industrial technology manufacturing company empowering a sustainable, connected, and safer world, recently announced the new ITV4030, a series of 22 amp, three-terminal, surface-mountable Li-ion battery protectors.

These 4.0 x 3.0 mm devices protect battery packs against overcurrent and overcharging (overvoltage) conditions. The innovative design uses embedded fuse and heater elements that provide fast response and reliable performance to interrupt the charging or discharging circuit before the battery pack becomes overcharged or overheated.

The ITV4030 Battery Protector is ideal for use in a wide range of data communications interfaces for consumer electronics, including:

  • •Tablets
  • •Power tools
  • •Robotic appliances
  • •E-bikes and e-scooters
  • •Emergency radios and eCall

“The ITV4030 is a 22-amp rated device, which extends our ITV line of li-ion battery protectors to provide more options for electronics designers,” said Stephen Li, Global Product Manager at Littelfuse. “Expanding our portfolio of three-terminal surface-mountable battery pack protectors enables us to provide these innovative solutions to a broader range of applications.”

The ITV4030 offers these key benefits:

  • •Fast response time and low internal resistance help prevent battery pack damage caused by overcurrent and overcharging.
  • •Surface mountable design simplifies automated PC board assembly processes.
  • •Certifications from UL and TUV aid in securing approvals with meeting industry compliance requirements.
  • •The environmentally friendly component is halogen-free and RoHS compliant.

 

How it works: An embedded three-terminal fuse cuts off the circuit when overcurrent issues occur. A heater element, directly embedded under the fuse element, generates enough heat to blow the fuse once overcharging is detected by IC or FET. 

Availability

The ITV4030 is available in tape and reel format in quantities of 5,000. Place ample requests through authorized Littelfuse distributors worldwide. For a listing of Littelfuse distributors, please visit Littelfuse.com

 DCS Littlefuse ITV4030 Battery Protectors 2 400

 

Additional information is available on by downloading the Datasheet here or by visiting the ITV4030 Battery Protector product page here 

 

Related Articles

Yaskawa Introduces New Generation of Linear Motor Stages

Yaskawa Introduces New Generation of Linear Motor Stages

The Drives & Motion Division of Yaskawa America, Inc. is pleased to announce the introduction of Sigma Trac II series linear servo motors stages to the Sigma-7 servo family. Sigma Trac II combines a Yaskawa SGLF2 series linear motor with linear bearings, high resolution absolute optical scale, cable management, and optional bellows to create a turnkey linear stage.

 

 

 

IP Communication Enabled On AK-PC 782B Towards The AK-SM 800A Series by Danfoss

IP Communication Enabled On AK-PC 782B Towards The AK-SM 800A Series by Danfoss

 

To keep the strong ADAP-KOOL® connectivity the new AK-PC 782B enables IP communication between Pack Controller and System Managers AK-SM 800A series. Danfoss is moving towards IP communication for improved performance and network integrity. Therefore, they will introduce new product variants for Pack Controller and System Manager supporting communication over IP. For decades their AK-PC 782A has been acknowledged for its proven reliability in CO₂ applications. With AK-PC 782B they are adding a new product variant to ensure support for future CO₂ solutions.

 

Nord Drivesystems: Modular ATEX drives – Protection against gas and dust

Nord Drivesystems: Modular ATEX drives – Protection against gas and dust

Since 2003 NORD DRIVESYSTEMS has supplied standard-compliant ATEX drive solutions such as dust or gas explosion protected motors , gear units, and electronic drive technology for zones 1, 2, 21 or 22. On the basis of the specific requirements for the application, the drive specialist provides individual solutions with versions and equipment from a modular system.

 

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…