Digi-Key Celebrates Ribbon Cutting of Product Distribution Centre Expansion

DCS Digi Key Celebrates Ribbon Cutting of Product Distribution Centre 400x275

August 22, 2022

 

Digi-Key Electronics, which offers the world’s largest selection of electronic components and automation products in stock for immediate shipment, celebrated the ribbon cutting of its Product Distribution Center expansion (PDCe) recently, expanding the company’s headquarters’ footprint by 2.2 million square feet for a combined total of more than 3 million square feet. The new facility allows Digi-Key to pick, pack and ship nearly three times the previous daily average of 27,000 packages to customers in more than 180 countries around the world.

Digi-Key officially opened its 2.2 million square foot Product Distribution Center expansion (PDCe) with a Digi-Reel cutting and ceremonial package handoffs today. Pictured: Chris Lauer, vice president, order fulfillment, Digi-Key; Thief River Falls Mayor Brian Holmer; Dr. Ron Stordahl, owner, Digi-Key; Dave Doherty, president, Digi-Key; Minnesota Department of Employment and Economic Development Commissioner Steve Grove; and Ramesh Babu, CIO, Digi-Key.

Digi-Key celebrated the opening event with an official cutting of tape from a Digi-Reel and ceremonial first package handoffs to each of the company’s four carrier partners: DHL, FedEx, UPS and USPS. Remarks were given by Digi-Key President Dave Doherty, Minnesota Department of Employment and Economic Development (DEED) Commissioner Steve Grove, Thief River Falls Mayor Brian Holmer and several other Digi-Key executives, as well as video messages from U.S. Senator Amy Klobuchar and Minnesota Governor Tim Walz.

“This is a significant milestone for all Digi-Key employees and our community,” said Dave Doherty, president of Digi-Key. “Our new product distribution center expansion will help us continue to deliver excellence to our customers for many years to come. As exciting as this expansion is for us, our hope is that our customers truly don’t notice a difference – the transition for them should be seamless, and if anything, result in an even better customer service experience than they are already accustomed to. For us, it’s deeper roots in Thief River Falls and a commitment to continue investing in this community and the state of Minnesota.”

The PDCe building was designed by Minnesota-based Widseth, and McShane Construction served as general contractor on the project. KNAPP, a leader in warehouse logistics and automation, partnered with Digi-Key on the internal automation and operational equipment.

“The state of Minnesota is thrilled to celebrate Digi-Key’s growth milestone today,” said Steve Grove, commissioner of Minnesota DEED. “Growth at this level is a win for the employees of Digi-Key, it’s a win for the Thief River Falls community and it’s a win for the state of Minnesota. The opening of this facility is made possible by local and state economic support which will contribute an additional $500 million in economic output, as well as the addition of more than 1,000 new jobs.”

The opening of the facility comes at a time of record growth for the company – Digi-Key wrapped up 2021 growing faster than ever before with a 65% growth rate, and bookings in 2022 are up more than 25% over last year. This year has also been one of the largest years for supplier additions for the company with 250 suppliers already added for the year. Since construction began in 2018, Digi-Key has added 1,500 suppliers and 1.5 million part numbers to their inventory.

The new facility is nearly fully automated, the only task that is truly done by hand is the actual picking of parts. Among the racks of components, carts are wire-guided so that the only thing a cart driver will have to worry about is where to stop. The wire-guided system will save more than 10% of time and is significantly safer.

The product distribution center expansion features two primary conveyor systems to provide redundancy in the case of a breakdown and provide opportunities for future growth. Scalability and growth were top of mind in the plans and design of the new building, and the majority of the fourth floor is currently open for the time being. There are over 27 miles of automated conveyor belt in the new facility, and an average order will travel more than 3,200 feet inside the building.

The building features six backup diesel engines and pumps along with a water tank built for fire suppression. It also has its own storm sewer and run-off ponds so as not to contribute to any flooding or storage concerns in the community.

The state-of-the-art facility features multiple common work areas and break rooms with oversized windows for optimal natural sunlight, as well as the Two Rivers Café that features a range of food options from ready-to-eat salads and wraps to burgers and paninis cooked to order. Local vendor, Las Ranitas, serves authentic Mexican options from the café a couple days per week as well. Digi-Key is recognized by the state of Minnesota as a Breastfeeding Friendly Workplace and has 16 private Mother’s Rooms throughout the PDCe for employees returning to work after parental leave. The building also has a spacious Quiet Room for employees to take their breaks, relax and recharge.

Outside of the new building there is a new Community Garden where employees can adopt a plot for the summer and plant seasonal flowers, fruits and vegetables. In the Skybridge connecting the original PDC to the PDCe building there is a “Digi-Walk” mapped out from end to end, offering a great place for employees to get in some extra steps during their breaks.

Sustainability was also considered during the planning and construction of the facility. The roof has a white membrane to reflect the sun’s heat, sensor-activated LED lights to minimize electricity usage, and a specially designed conveying system which maximizes energy usage as well as efficiency.

Digi Key Logo 300x150

To learn more about Digi-Key, visit the Digi-Key website by clicking here 

 

Source

 

Related Articles

  • New G2RV-ST And G3RV-ST Relays from Omron

    New G2RV-ST And G3RV-ST Relays from Omron

    Omron’s New G2RV-ST And G3RV-ST Relays Are Among the Fastest in the Industry That Provide Better Visibility, Top-Notch Reliability, and Vibration Resistance January 23, 2023 Speedier relays are a key requirement in today’s fast-paced manufacturing industry, and Omron responded to this need with the new ST relays that are among the fastest available on the… Read More…


Editor’s Pick: Featured Article

Conserving Power and CO2 Emissions with Premium Efficiency Motors

The process of converting electrical energy to mechanical energy is never perfect. As much as we would like to have a 100% efficient motor, it is impossible to build a machine that will take 746 watts of electricity (the equivalent of 1 Hp) and convert it to 1 Hp of mechanical output. It always takes somewhat more than 746 watts to yield 1 Hp’s worth of output.

Motors are continuously being pushed to be more efficient and reduce these losses. Over the years the guiding regulations of motor manufacturing have pushed us to improve efficiencies to new levels to reduce the considerable global power consumption of motors, as they are everywhere. From our factories, utilities and homes and most anywhere you can think of.

How much power consumption aka money are you spending that you do not have to? Take a minute while having your coffee to see if you can save money.

Read More



Latest Articles

  • 5 Tips for Using Servo Drives in Exoskeleton Robots

    January 30, 2023 Exoskeleton robots are wearable augmentative devices that enhance the physical capabilities of their human wearers. Offering the ability to combine human intelligence and control with the strength and durability of a robot, they can be used for gait rehabilitation or locomotion assistance, offering many applications in industry, medicine, and more.1 However, developing… Read More…

  • Energy Technology Perspectives 2023

    Energy Technology Perspectives 2023

    Energy Technology Perspectives 2023 highlights major market and employment opportunities, as well as the emerging risks, for countries racing to lead the clean energy industries of today and tomorrow. The energy world is at the dawn of a new industrial age – the age of clean energy technology manufacturing – that is creating major new markets and millions of jobs but also raising new risks, prompting countries across the globe to devise industrial strategies to secure their place in the new global energy economy, according to a major new IEA report. Read More…