| |

WAGO’s New IO-Link Converter

January 11, 2024

WAGO’s New IO-Link Converter

IO-Link Converter

WAGO’s new IO-Link Converter is a 4-20 mA analog input with a digital display incorporating analog signals into a digital communication network for sensors and actuators from the field into an IO-Link-capable system.

The Analog/IO-Link Converter provides an economical, compact solution for easily incorporating conventional analog sensors and actuators into an IO-Link-capable system like the WAGO I/O System Field, depending on their type. This allows reliable, cost-effective, interference-immune acquisition and output of analog signals. Digital communication can easily be introduced (retrofitted) when old systems are modernized. The converter can be configured directly on the device via IO-Link. A compact design, IP67 protection and the high operating temperature range make the Analog/IO-Link Converter ideal for automation without control cabinets.

The product is used for evaluation of an analog signal, a connected sensor or another device with an analog output. The product has one analog current input and two outputs. Output 1 is digital, and output 2 can optionally be used as analog current output.

The product can be operated in stand-alone mode and IO-Link mode.

WAGO’s New IO-Link Converter

Application:

  • Decentralized display, preprocessing and conversion of analog signals

Use as an IO-Link device:

The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation.

The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation.

Use as a stand-alone device without IO-Link:

The device compares the measured current value with the set parameters and switches the output according to the selected function.

This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.

Source

More Information

WAGO

Related Product

WAGO’s New Basic Controller 100 Joins the WAGO-I/O-System

WAGO’s new Basic Controller 100 joins the WAGO-I/O-System. Programmed with CODESYS 3.5 engineering software, they can be configured using web-based management with most any browser and are ideal for large volume and price sensitive control applications.

Related Articles

| |

Endress+Hauser Enhances its Go-To Flowmeter for Food+Beverage and Life Sciences

November 7, 2023 Promag H flowmeter provides temperature, flow and conductivity measurement in one device Endress+Hauser is adding more innovations to its feature-rich Proline Promag H 300/500 series electromagnetic flowmeters for hygienic operations, endowing them with more capability to assure process integrity and maximize production uptime. Promag H is the go-to series for the food…

| |

Moxa Achieves World’s First IEC 62443-4-2 Certification for Industrial Secure Routers

January 9, 2024 Moxa Inc., a leader in industrial communication and networking focusing on securing industrial networks, is thrilled to announce that the company has achieved the world’s first IEC 62443-4-2 Security Level 2 (SL2) certification[1] for industrial secure routers. This coveted certification was awarded to Moxa’s flagship industrial secure routers, the EDR-G9010 and TN-4900 Series….

WAGO’s New Compact Controller 100 Maximizes Engineering Flexibility
| |

WAGO’s New Compact Controller 100 Maximizes Engineering Flexibility

September 6, 2023 Compact Controller 100; 8DI 4DO 2AI 2AO 2NI1K/PT1K 1RS485; 2 x ETHERNET; SD The new Compact Controller 100, with a real-time Linux® operating system, gives users maximum freedom. This compact device is freely programmable with CODESYS V3, but can also be used with IEC 61131-independent software, for example, Node-RED, Python or C++….

| |

Government of Canada Launches Union-Led Advisory Table to Help Workers Succeed in Canada’s Economic Future

December 5, 2023 Government of Canada Launches Union-Led Advisory Table to Help Workers Succeed in Canada’s Economic Future. Governments make better economic decisions when we listen to workers. Every major challenge and opportunity we’re facing right now—the shift to clean energy, the housing shortage, climate change—comes down to workers. So workers shouldn’t just have a…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…