New SDS Series Stainless Steel Motor Disconnects from MENNEKES

DCS MENNEKES New SDS Motor Disconnects 1 400

April 20, 2022

 

MENNEKES’ latest stainless steel motor disconnects, the SDS Series, are available 30A, 60A and 100A and come standard with Early Break and Late Make auxiliary contacts.

Compliances and Performance
•• Suitable as Motor Disconnect per 2002 NEC Article 430-109(a)(6)
•• UL Standard 508 Assemblies
•• Environmental: NEMA Type 4X; 12; IP69K
•• UV Resistance: Handle Material is UV Stabilized
•• In-House Endurance Testing: 10,000 Electrical Cycles/100,000 Mechanical Cycles
•• SCCR – 65kA RMS Symmetrical at Full Rate Current with Class J Fuses

Features and Benefits
•• Early Break and Late Make Auxiliary Contacts
•• High Visibility LO/TO Handle
•• Captive Cover Screws
•• One Piece Punched EPDM Gasket
•• Replaceable Din Rail Mounted Switch
•• Interlocked Cover when in ON Position
•• Ground Lead to Bond Cover
•• External Mounting Feet
with 1” Standof

 

Check out their video to learn more. 

 

 

 

 

 

 

 

 

 

 

To learn more, download the product brochure here, or visiti the MENNEKES’s website by clicking here 

 

 

Related Articles

Beckhoff: AL8000 Linear Motors – Highly Dynamic Linear Motors With Flexible, Modular Design

Beckhoff: AL8000 Linear Motors – Highly Dynamic Linear Motors With Flexible, Modular Design

Backed by a wealth of expertise in the development of rotary servomotors, Beckhoff has added an innovative product to its portfolio in the area of drive technology. This new generation of high‐performance and modular linear motors was developed in cooperation with its dynamically growing subsidiary Fertig Motors.

 

 

 

Type 3/12/4 Mild Steel Junction Box C3SC Series from Hammond Manufacturing

Type 3/12/4 Mild Steel Junction Box C3SC Series from Hammond Manufacturing

 

Designed for use as a wiring box, junction box, terminal or pull box in indoor or outdoor applications where subject to windblown dust or rain.UL 508A Listed; Type 3, 4, 12, cULus Listed per CSA C22.2 No 94; Type 3, 4, 12, Complies with NEMA Type 3, 4 and 12 and IEC 60529, IP66. Constructed with 14 gauge steel body up to 12″x12″; 12 gauge body when 30″x30″ or larger and 14 gauge steel cover up to 24″x24″; 10 gauge cover when 16″x16″ or larger. 

 

|

SMC’s Air-Management Systems Offer Sustainability, Condition-Based Maintenance, and Digitization

February 22, 2023 Advanced Motion & Controls Ltd. carries solutions by SMC Automation, including air-management systems in five configurations. These devices enable visualization of production-equipment status, information that can easily be monitored from another location or even outside the office: flow rates, pressure, and temperature, as well as different kinds of sensor data, can be communicated…

Regal Introduces Tag-It Asset Management Program powered by Perceptiv intelligence, Adding to Company’s IoT Offerings

Regal Introduces Tag-It Asset Management Program powered by Perceptiv intelligence, Adding to Company’s IoT Offerings

Regal Beloit Corporation, a major manufacturer of electric motors, electrical motion controls, power generation and power transmission components, recently announced the introduction of its Tag-It program for asset management.

 

 

 

Festo’s DLGF Flat Design Rodless Drive Fits Tight Spaces and Budgets

Festo’s DLGF Flat Design Rodless Drive Fits Tight Spaces and Budgets

Festo designed the new space-saving, flat, DLGF rodless linear drive as a very economical choice for applications where installation space is especially tight, like in electronics, small parts assembly, packaging and handling technology. Since those space considerations can also make a pneumatic drive harder to adjust or service, Festo also made its proprietary self-adjusting end-cushioning (PPS) standard with DLGF. Self-adjusting cushioning saves time and makes processes more reliable; the drive is always providing the correct cushioning.

 

 

 

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…