Need help coupling two parallel shafts? Electromate offers a full family of Power-On Clutches

October 15, 2019

Power-on Clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose-fitting pin or bracket through the anti-rotation tab.

Typical Applications of Clutches include:

Packaging Machinery

Medical Equipment

Conveyors

Postal Sorters/Readers

Document Feeders

Textile Equipment

Mobile Power Equipment

Copiers/Printers

Electromate offers a full family of Power-On Clutches, from Inertia Dynamics, for most applications.  All Inertia Dynamics clutches are recognized by Underwriters Laboratories to both U.S. and Canadian safety requirements.

Information on the Power-On Clutches from Inertia Dynamics can be viewed at: https://www.electromate.com/products/power-transmission-mechanical-products/clutches/

Related Articles

|

POSITAL Announces Next-Generation TILTIX Inclinometers with Analog Outputs

October 27, 2023 As part of its ambitious NEXTGEN program, POSITAL has released new members of its TILTIX inclinometer family with analog communications interfaces. The new versions are mechanically and electrically compatible with older models and share the same mounting footprint. POSITAL’s TILTIX inclinometers are used in motion control and safety assurance systems to measure…

Achieve the Next Level of Energy Efficiency With ABB’s New Baldor-Reliance EC Titanium Integrated Motor Drive
|

Achieve the Next Level of Energy Efficiency With ABB’s New Baldor-Reliance EC Titanium Integrated Motor Drive

Motor standards have been in place for decades, yet there is a growing demand to achieve greater efficiencies as regulations continue to tighten on the total system for fans, pumps and compressors. Equipment manufacturers are turning to new motor technologies to achieve the highest system efficiency possible from wire to air while using sustainable materials.

 

 

 

|

Feintool and SITEC Strengthen Cooperation in Europe

March 20, 2023 After a successful cooperation start in Asia, both technology companies have signed a Memorandum of Understanding to intensify cooperation in the production of metallic bipolar plates for fuel cells and electrolysers in Europe. The market for fuel cell and electrolyser applications in Europe is developing very dynamically and offers high potential. In…

Lifelong Learning Secures Top Position in Competition
| | | | | |

Lifelong Learning Secures Top Position in Competition

April 24, 2024 Setting trends with training courses from Festo Didactic on battery recycling, AI and biologization Electromobility, artificial intelligence and sustainability – the economy is in the midst of industrial transformation. In addition to the right automation solutions, qualified specialists are the key to success. With digital learning opportunities as well as seminars and…

| |

Murrelektronik Smart Production Solutions: Connectors

MQ15 Power Connector from Murrelektronik- Powering your application has never been easier September 19, 2023 In today’s world, electricity is king! Nothing in production works without it. Machines and systems need reliable, easy to install and safe to operate power. Murrelektronik offers a solution with their MQ15 family of power connectors. With the MQ15, a…

Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More

Latest Articles

  • SIBERprotectTM Protects Industrial OT Systems with Innovative Cyber Response Solution

    May 16, 2024 A cyber-attack can happen within a millisecond. Defend your operation just as fast with SIBERprotectTM: an automated, intelligent solution for your industrial OT operation. By Krystie Johnston Siemens recently introduced SIBERprotectTM, an automated, intelligent solution that defends critical infrastructure and OT systems in industrial settings from cyberattacks. This advanced, automatic, response to… Read More…

  • Press Retrofit is Textbook: New for Old – and Even More Productive!

    May 15, 2024 Grass GmbH, a global manufacturer of movement systems – including telescopic slides – required a safety upgrade of a complete press line for steel forming at their Salzburg plant. Where normative safety requirements are concerned, presses have a special status: so they were looking for a partner that was able to convert… Read More…