Yaskawa Whitepaper: Redundant VFDs and Fan Arrays in Critical Operations

February 12, 2024 As the industrial internet of things (IIoT) continues to gain momentum, original equipment manufacturers (OEMs) and system integrators (SIs) are faced with the challenge of implementing data collection systems without compromising deterministic motion control or cybersecurity, In this article, Omron explores how all-in-one automation platforms can address these concerns, allowing OEMs and…
May 31, 2023 Stamping and forming machine builder Bihler has developed an innovative servo production system for the hairpins used in electric motors. With short cycle times and automated changeover between variants, the system is particularly efficient at producing the bent copper parts in high quantities. For automation and motion control, Bihler relies almost exclusively…
High-rise buildings in France, tunnels in Switzerland, prestressed concrete ceilings in Germany – one source of their stability is wire products from Kehl in Baden-Württemberg. Badische Drahtwerke GmbH (BDW) supplies reinforcing steel mesh, reinforcement cages, lattice girders and many other rebar and reinforcement products to the region and neighboring countries. When the machines used to produce lattice girders had to undergo a safety update, the engineers took advantage of the communication capabilities of an intelligent power supply from WAGO to improve process efficiency.
January 2, 2024 The world of autonomous mobile robots (AMRs) is rapidly growing and provides businesses with a range of exciting opportunities to streamline processes and increase operational efficiency. If you are just getting started with mobile robots, it can seem daunting to know where to begin. Fortunately, this article will provide you with the…
March 20, 2023 Blair Sackney This article contains my technical opinions and is for general information purposes only. The topic covers power and control cable bending radii which can differ from data / fiber / mining cable requirements. Introduction to Bending Radius This newsletter will discuss minimum bending radius requirements for power and control cables…
July 9, 2025 From outdated to optimized: how ABB helped modernize a Swedish rolling mill and how Proax can help you in Canada Kanthal AB, a leading steel manufacturer in Sweden, recently faced a critical challenge. Their rolling mill in Hallstahammar had relied on a DC motor and drive system installed more than 70 years…
Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.
Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.
September 16, 2025 In the race toward smarter, more automated industrial operations, every microsecond counts. In response to rising demands for higher precision, speed, and synchronization across industries like robotics, packaging, and semiconductors, EtherCAT has become the standard for high-performance motion control. Its unique “on-the-fly” processing principle delivers deterministic, high-speed communication that traditional industrial Ethernet… Read More…
September 9, 2025 By Krystie Johnston Schneider Electric Canada is leveraging artificial intelligence (AI) to transform energy management across various end markets. To help buildings in Canada reach net zero, Schneider takes a multi-pronged approach to leverage AI to identify energy inefficiencies in homes and commercial and industrial institutions and monitor and adapt the technologies… Read More…
This project is funded [in part] by the Government of Canada.
Ce projet est financé [en partie] par le gouvernement du Canada.