February 6, 2023
The Eplan Partner Network was founded over two years ago and around sixty companies have joined in the meantime. Strategic partners such as Phoenix Contact, Siemens and Rockwell Automation, plus technology partners – including ABB, Lapp Kabel, Wago and Weidmüller – come together under one guiding principle: providing the highest degree of integration capability with Eplan for their solutions. In the era of digital transformation, everyone is combining forces so that various software applications such as product configurators, CPQ, PLC, PLM/ERP and others can ideally communicate with each other.
Companies rely on a variety of software applications from different manufacturers. The Eplan Partner Network was founded to exploit the full potential of productive interactions between the various solutions in the environment of product configurators, CPQ, PLC and PLM/ERP. The network has set binding targets for further developing their integrations, creating a solid basis for the manufacturers. Customers benefit from the tested quality of the software, ongoing developments of such and a systematic increase in benefits to their own workflows. Open interfaces and deep integration offer a wide range of opportunities for implementing the digital transformation in the real world.
The watchword is integration
The Eplan Partner Network is a global framework organisation with companies divided into four types of partners: strategic partners, technology partners, solutions partners and research partners. By way of joint development of integrations, not to mention quality assurance and support based on open interfaces, users derive the greatest possible benefits from the applications.
International partner expansion
Key players in automation were already participating in the network in early 2021, including the strategic partners Rittal, Phoenix Contact and Rockwell Automation, and which was expanded in 2022 to include Siemens and the company’s Smart Infrastructure division. Technology partners make up the most comprehensive area in the Eplan Partner Network, with 38 companies from this sector.
“Eplan plays an important role in the growing network of electrical systems designers. A clear example is the seamless integration between ABB’s digital e-Configure platform and the Eplan Data Portal, which streamlines the design process for users. With the introduction of sustainable energy systems and smart industry upgrades, ABB is committed to supporting professionals managing these changes. The integration of engineering tools and configuration tools ensures both time savings and high-quality data.”Luca Cavalli, Digital Ecosystem Managerat ABB
Other technology partners include Auvesy-MDT, Ehrt, Gossen Metrawatt, Jetter and Sigmatek. Internationally, Digiwin (China) and Trace Software (France) have also been integrated into the network, as have Omron, Wago and Weidmüller, which are all global players. Sandra Huang of Digiwin says, “The interface between Digiwin PLM and Eplan helps engineers to fully focus on their actual project planning. All relevant information including bills of materials, parts data and project data are automatically synchronised between the Eplan Platform and Digiwin PLM. Users benefit from consistent and up-to-date data throughout the entire project life cycle.”
On the solutions partners side of thing, there are a slew of well-known automation companies including Alexander Bürkle (electronics wholesaler/technology services provider), CADTalk (CAD/PDM-ERP integrations), Cideon (systems integrator), D&TS GMBH (master data management), Elmo Solutions (CAD/PDM/PLM-ERP integrations), Grollmus (PLC programming), PLM CAD Utilities (CAD/PDM/PLM-ERP integrations), Secude International (Microsoft and SAP Partners), Semodia (MTP export), Solidline (PLM systems vendor), Wus-Tec (wire fabrication), and Zahnen Technik (water/wastewater technology). This demonstrates the wide range of solutions that are utilised and integrated into the Eplan environment. CTO Benedikt Ney at Zahnen Technik says, “We want to provide everyone access to clean water. Thanks to our amazing partnership with Eplan, we’re getting closer to this vision every day.”
In the field of research partnerships, a cooperation with TH Lübeck University was recently signed, expanding the circle of existing research partners, the European 4.0 Transformation Center (E4TC) and the Institute for Control Engineering of Machine Tools and Manufacturing Units (ISW) of the University of Stuttgart.
The new Eplan Platform 2023 is streamlining and accelerating project planning with new cloud-based device management and multi-standard support for schematic macros. This means that users can get results more quickly – especially when working on international projects – due to the simplified device data management system while increasing overall project quality. The new 3D graphics core, an optimised cable editor and the new Insert Center also bring more performance and transparency to engineering.