EPLAN Data Portal Update May 2021

PB 10 Eplan 400

May 4, 2021

Since May 3rd, in addition to updated data EPLAN are very pleased to announce the following new partners:

New manufacturer catalogs

  •    –   Banner Engineering Corporation – 30 new data sets with photoelectric sensors
  •    –   Jiangsu Shangshang Cable Group – 19,373 new data sets with cables
  •    –   Zhejiang SUPCON Technology Co., Ltd. – 9 new data sets with PLC

New and updated data sets

  •    –   ABB Stotz Kontakt GmbH – 2,612 new data sets with protection devices and signal devices
  •    –   Aventics GmbH – 666 new data sets with valves and pressure regulators
  •    –   Bachmann electronic GmbH – 8 new data sets with PLC
  •    –   Block Transformatoren – 70 new and 166 updated data sets with line reactors, power supplies and EMI-filters
  •    –   Bosch Rexroth AG – 3 new data sets with converters
  •    –   Danfoss Drives A/S – 61 new and 25 updated data sets with converters
  •    –   eks Engel FOS GmbH & Co. KG – 21 updated data sets with transmission paths
  •    –   Festo SE & Co. KG – 3 updated data sets with PLC
  •    –   Fuji Electric FA Components Co., Ltd. – 448 new and 17 updated data sets with parts from different product groups
  •    –   Hellermann Tyton – 474 updated data sets with lables and routing accessories
  •    –   Hummel AG – 143 updated data sets with cable glands
  •    –   ifm electronic gmbh – 6 new and 46 updated data sets with PLC and sensors
  •    –   Igus GmbH – 40 new data sets with stepper motors
  •    –   Suzhou Inovance Technology Co., Ltd. – 131 new and 9 updated data sets with PLC, cables, voltage sources and generators
  •    –   KEBA GmbH Automation – 41 updated data sets with PLC and plugs
  •    –   KALEJA GmbH – 3 updated data sets with amplifiers and controllers
  •    –   Murrplastik Systemtechnik GmbH – 2,143 updated data sets with complete exchange of the data portfolio
  •    –   Murrelektronik GmbH – 152 new and 27 updated data sets with PLC, network switches, optocouplers, luminaires and current monitoring equipment
  •    –   NKK SWITCHES Co., Ltd. – 89 updated data sets with switches
  •    –   Omron Europe B.V. – 98 new data sets with sensors
  •    –   Pepperl+Fuchs SE – 20 new data sets with sensors
  •    –   RKC Instruments INC. – 464 new data sets with digital controllers
  •    –   Rockwell Automation – 47 new and 661 updated data sets with PLC and cables
  •    –   J. Schmalz GmbH – 2 new data sets with motors and fluid pumps
  •    –   Schneider Electric SA – 180 new and 87 updated data sets with sensors, switches, pushbuttons, signal devices, PLC, housings, amplifiers and controllers
  •    –   Sick AG – 1,506 new and 16 updated data sets with sensors, switches, pushbuttons and field distribution devices
  •    –   TOYOGIKEN Co., Ltd. – 1,872 new data sets with terminals, cables and transformers
  •    –   Kyoritsu Keiki Co., Ltd. – 761 new data sets with sensors, terminals and relays

Summary

  •    –   3 new manufacturer
  •    –   28 updated manufacturer
  •    –   27,798 new data sets
  •    –   3,971 updated data sets
  •    –   821 deleted data set
  •    –   28,200 new parts with EDS
  •    –   In total 337,954 parts with EDS

In total 1,019,347 data sets and 341 manufacturer are available in the EPLAN Data Portal.

Source

Related Articles



Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More



Latest Articles

  • Ensure Food Safety With Clean Compressed Air

    June 11, 2024 Current Good Manufacturing Practices (cGMP), which fall under the Food Safety Modernization Act (FSMA), stipulate the cleanability and cross-contamination standards that food processing plants must follow, ensuring food is safe for consumption. One easy way to meet cGMP and FSMA guidelines is to upgrade your pneumatic systems with proper air filtration systems…. Read More…

  • SmartD Challenges the Status Quo of Motor Control with Clean Power VFDs

    June 11, 2024 By Krystie Johnston SmartD’s Clean Power variable frequency drive is the next generation of motor control products. Using revolutionary power electronics and modulation algorithms, it maximizes energy efficiency and produces a clean sine wave. SmartD technologies is a Canadian startup that has developed what they say is one of the world’s first… Read More…