Danfoss factory among world’s smartest

January 24, 2019

The World Economic Forum identifies 16 of the world’s most advanced smart factories – so-called Fourth Industrial Revolution production sites. Danfoss’ factory in Wuqing, China, is one of them. Read why.

In Danfoss’ compressor factory in Wuqing, China, automatically-guided vehicles drive up and down the aisles and supply workers with components. The same workers use intelligent Bluetooth connected tools that automatically tell if an assembly process is incorrectly performed. They also have access to step-by-step electronic work descriptions – no matter where in the factory they work on a given day.

The list of smart technologies, which the factory has invested in over the last few years, is very long. What’s more, the investment has paid off. Compared to two years ago, employee productivity has gone up by 30 percent, scrap costs down by 20 percent, and customer complaints by 57. 

And, now, Danfoss in Wuqing has made it onto the World Economic Forum’s list of 16 of the world’s smartest factories. The Forum identifies a smart factory as one which is not only good at adopting smart technologies, but also at turning the investment into operational and financial benefits.

Making the list, the Forum has selected from a group of more than 1,000 factories.

“Representatives from the World Economic Forum recently audited our site during a full day. We are very proud of the result – that we made it onto this final shortlist. It’s a clear testament to the fact that our digitalization effort has also paid off in terms of productivity, quality improvements, and customer satisfaction. We will continue adding new technology, so we constantly improve in these areas,” says Senior Director of Operations Ruixing Zhang, Danfoss in Wuqing.

The World Economic Forum published the list of the 16 smart factories on January 10 up to its 2019 Annual Meeting in Davos, Switzerland. The current list is an update of a previous list published in September last year containing an initial nine companies.

With the initiative, the World Economic Forum has created a network where industrial companies can share experiences about Fourth Industrial Revolution technology and learn from each other. Read more here.

”In Danfoss we work with digitalization on all levels in the organization. And we invest heavily in this area, to secure that we are ahead of the curve, and that we meet the expectations and demands from our customers. So, we are very proud, to get recognized for this,” says Danfoss President and CEO, Kim Fausing.

Danfoss’ commercial compressors are used in cooling and refrigeration systems worldwide.

Helena Leurent, Head of the Shaping the Future of Production System Initiative, World Economic Forum: “The 16 selected factories are leaders in the technologies of the Fourth Industrial Revolution. They create value and resilience through the supply chain, and agility and responsiveness for customers.”

Facts:

The Wuqing factory has 600 employees and is one of several Danfoss factories systematically investing in and using smart technology. Another example is Danfoss Drives in Gråsten, Denmark. The Wuqing factory has 600 employees and is one of several Danfoss factories systematically investing in and using smart technology. Tour our factories and see other examples of our smart solutions in this digital story. Apart from Danfoss, the group of 16 factories includes companies such as BMW, Procter & Gamble, Siemens Industrial Automation Products, and Schneider Electric.

For more information:

Danfoss Media Relations, Tel: + 45 70 20 44 88

Related Articles



Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More



Latest Articles

  • How to Select the Correct Data Cable for Your Industrial Application

    July 18, 2024 In this article, you will learn what the most common mistakes are when selecting Industrial Ethernet and bus cables and how to avoid them. All cables and wires that contribute to communication in any way are commonly referred to as data cables. However, there are significant differences such as the multitude of… Read More…

  • Legacy OT Risks: The Hinderances of Aging Systems – and How to Move Forward

    July 15, 2024 Today, the role of a chief information security officer (CISO) comes with a heavy ethical and social responsibility. Yes, we and our teams have a primary responsibility to protect the cybersecurity of critical infrastructures that provide vital services like electricity, water, oil, gas, healthcare, and food production, to name a few. As… Read More…