|

DMC-3x01x The Latest Generation Single Axis Motion Controller from Galil

This 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

This DMC-3x01x 1-axis motion controller features Ethernet/RS232 communication and an optional 800W Servo Drive

The DMC-3x01x Motion Controller Series is Galil’s latest generation single-axis motion controller. It uses a 32-bit RISC processor to provide higher speed than older models. Like all Galil controllers, programming the DMC-3x01x is simplified with two-letter, intuitive commands and a full set of software tools for servo tuning and analysis.

The DMC-3x01x Motion Controller Series features:

  • Available as a compact card-level or box-level unit
  • Connects to a stepper or servo motor amplifier of any power range
  • Can be purchased with an internal 800-Watt brushless sine drive or microstepping drive which minimizes space, cost, and wiring
  • Operates stand-alone or can be networked to a PC via Ethernet
  • Modes of motion include:
    • point-to-point positioning
    • position tracking
    • jogging
    • contouring
    • electronic gearing
    • ecam

Additional Features include:

  • Two daisy-chainable Ethernet 100 Base-T ports. One 115kbaud RS232 port
  • Ethernet supports multiple masters and slaves. TCP/IP, UDP and Modbus TCP master protocol for communication with I/O devices
  • Encoder feedback up to 15 MHz. Quadrature standard. SSI and BiSS encoder option(SER). Sinusoidal Encoder option (DMC-31xxx). Main and auxiliary encoder inputs
  • Non-volatile memory for programs, variables, and arrays.
  • Concurrent execution of four programs.
  • Optically isolated forward and reverse limit inputs and homing inputs
  • 8 uncommitted, isolated inputs and 4 isolated outputs
  • High speed position latch and output compare
  • 2 uncommitted 12bit 0-5V analog inputs (16bit ±10V inputs on DMC-31xxx) and 1 uncommitted analog output
  • Standard power input is +/-12V and 5V. Controller available with optional DC-DC converter with 9-48VDC single supply input. (Option for 20-80 VDC).

For more information, visit Galil Ethernet/RS232 Single Axis Motion Controller

Related Articles



Editor’s Pick: Featured Article

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s u-control 2000: The Automation Controller

Weidmüller’s scalable engineering software, u-control 2000, adapts individually to your requirements. And, the u-control is powerful, compact and fully compatible with Weidmüller’s I/O system u-remote. This article looks at what makes u-control the heart of your automation.

Programmable logic controllers (PLCs) are one of the main components of any automated system. A typical control system has inputs, outputs, controllers (i.e., PLCs), and some type of human interaction with the system, a human machine interface (HMI), for example.

Read More



Latest Articles

  • M12 Cables: Enhancing Connectivity Across Industries

    May 29, 2024 Delivery, reliability, and selection; are three criteria that best describe Proax’s commitment to offering optimal options for in-stock connectivity – especially when it comes to M12 cables. In partnership with Phoenix Contact, customers can expect a large range of solutions designed for the safe transmission of signals and power. Choose from an… Read More…

  • The Story of How SmartD Revolutionized Motor Control for the 21st Century

    The Story of How SmartD Revolutionized Motor Control for the 21st Century

    May 28, 2024 By Krystie Johnston To reinvent the wheel is to attempt to duplicate something that has already been created, most often with superior results. SmartD has not reinvented the Variable Frequency Drive (VFD). They have revolutionized it. When Simon Leblond, CEO of SmartD Technologies Inc. and his co-founders set out to start a… Read More…