Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

 

Our Team

Managing Editor
Owen Hurst

owenhurst@Kerrwil.com

(705) 527-7666 ext. 221

 

GoldBook Editor

Eileen Walsh
eileenwalsh@kerrwil.com 

705-527-7666

Accounting

Michelle McKerness
michellemckerness@kerrwil.com

705-527-7666

Sales

Owen Hurst

owenhurst@kerrwil.com

705-527-7666 x.221

 

Sales

David Whiteside

davidwhiteside@Kerrwil.com

(705) 527-7666

 

Publisher

John W. Kerr Jr.

705.527.7666

johnkerr@kerrwil.com 

 


ADDRESS
538 Elizabeth Street, Midland, Ontario, L4R 2A3 Canada

DIRECTIONS FROM TORONTO
Take Highway 400 north from Toronto.
Take exit 121 Highway 93 to Penetanguishene.
Turn right at Yonge Street (30 km from Highway 400).
Turn left at First Street.
Turn left at Elizabeth Street.


Editor's Pick: Featured Article


 

DCS Siemens SIRIUS Controls Ensures Cold Beer 1 400

Breweries are known for transforming malt, hops, and yeast into beer in gleaming brewing kettles and large fermentation tanks linked by numerous pipes.

Over the centuries, the equipment for mashing, lautering, boiling, and fermenting beer according to carefully guarded recipes has been steadily perfected.

 

The chiller is the heart of the brewery

One of the most important parts of the brewery, and perhaps the least visible, is the chiller. The fermentation temperature of the beer is crucial, which means that the heat generated by the yeast fermentation must be carefully controlled by the chiller.

If the beer ferments at too high a temperature, the yeast can produce a variety of undesirable aromas that ruin the beer.

According to Justin Thomas, President of G&D Chillers, based in Oregon

"The chiller is the heart of the brewery. Owners invest not only a lot of money in the brewery and brewing equipment, but also a great deal of time in the production of beer. But if the chiller fails, all that goes out the window."

Partnerships to keep pace with growth

Thomas says that growth at G&D Chillers has been exponential over the past 15 years. To continue this rate of success, the company had to look for new ways to meet customer demands for reliable, state-of-the-art chiller options.

For example, G&D Chillers recently teamed up with Siemens and the global distribution and supply chain solutions company WESCO to meet these needs and stay ahead of the competition. "We're still a small manufacturing company, but big enough to produce some technically advanced equipment," says Thomas. "We've always been service-oriented and always stood by our equipment, no matter what the problem. We get the same kind of support and service from Siemens that we give to our own customers."

 

Read more here 


 


Sponsored Content


Convenient Power Infeed and Distribution 

Siemens DCS Aug3 Kerwill CP Ad 2 300x250 copy

 

 

The 3RV29 infeed system is based on a basic module complete with a lateral incoming supply unit (three-phase busbar with infeed). Expansion modules (three-phase busbars for system expansion) are available for extending the system.

 

 

To learn more, click here

 

 

 


 

Latest Articles

  • Prev
  Well-made protective packaging is key to ensuring that foods such as fresh fruit and ...
  What’s the secret to providing superior service and staying competitive in a changing ...
  When the Swiss engineering company Peter Huber AG won the order to upgrade and ...
  IEC 62061 / EN IEC 62061 represents a sector-specific standard under IEC 61508. ...
  NSK is a global manufacturer of ball and roller bearings, precision linear motion and ...
  World leaders from government and industry will meet in the southern Denmark city of ...
  The safety and well-being of tunnel users depend on excellent ventilation. With its ...
  ABB recently hosted Billions of Better Decisions - Empowering the Workforce with the ...
  The ABB #BuildtheFuture Roadshow delivers the latest electrical products, services, ...
  Global industry is accelerating its investment in energy efficiency in the next five ...

 

Nationwide Equipment NetworkWhat’s the secret to providing superior service and staying competitive in a changing market? Well, you might learn something from ALTA Refrigeration’s experience. Over ten years, it transformed itself from a custom engineering services company into a scalable industrial equipment manufacturer, using an edge-oriented control architecture to efficiently manage a growing installed base.

 Originally started in 1975 as Industrial Refrigeration Services, ALTA has been designing and installing refrigeration systems across the United States for more than 45 years. And for a long time, they were large, custom-designed systems that used a central machine room to deliver refrigerant to various facility areas through long, overhead piping runs.

Read More


 

 

International Application by PILZWhen the Swiss engineering company Peter Huber AG won the order to upgrade and convert the control and safety technology on manual-feed bending machines - to include an additional sheet metal feed via robot - alongside the requirements for economy, flexibility and efficiency there was also one key condition in the requirement specification: wherever possible, the envisaged solution should continue to use the existing controllers.

As cooperation between human, robot and machine presents a complex challenge not only in control terms but also regarding safety, an innovative solution was sought. Peter Huber found it in the modular safety relay myPNOZ.

 

Read More


 

Product News

  • Prev
  Transitioning to liquid low-carbon fuels is an important part of of the CO2 ...
  Promass Q 300/500, the high-tech Coriolis flowmeter series from Endress+Hauser for ...
HPS has announced the availability of a complete line of low voltage and medium voltage ...
  AutomationDirect has added new M30 harsh duty photoelectric sensors from Eaton. The ...
  Demand continuously increases in the SEMICON industry to manufacture Integrated ...
  NSK Tough Steel material combined with optimized ball circulation and rolling contact ...
  Endress+Hauser has incorporated its market leading Heartbeat Technology in many of ...
  With around 20,000 submissions, the Red Dot Design Award is one of the world's ...
  Worldwide, over 90 million barrels of crude oil, natural gas and refined hydrocarbons ...
  Control Techniques' Unidrive M300 and M700 with MCI modules retain ...

New Product

Advanced Motion & ControlsEuchner products are available in Canada via Advanced Motion & Controls Ltd. Among the latest examples are three safety engineering components for installations: an upgraded multifunctional gate box, as well as two innovative FlexFunction solutions – a safety switch and a safe key system – all recently showcased at the automatica 2022 trade show.

In the era of the Industrial Internet of Things, safety engineering components must conform to a new standard for communication, a development of which Euchner is fully aware.



Read More


 


Dyneo+ by Nidec Leroy-SomerWith more than 70 years of experience, NOVENCO Building & Industry, a member of the SCHAKO Group, ranks among the world leaders in design, development and manufacture of ventilation products and systems on the technological forefront of performance and durability. The company provides a vast choice of energy-efficient and life safety ventilation systems worldwide, which are well-known for uncompromising quality and the highest standards within a wide range of industries.

With focus on a sustainable green solution for the latest renovation project of the Teutschenthal backfill mine in Germany, operated by GTS (Grube Teutschenthal Sicherungs GmbH & Co. KG), in the Geiger Group, the NOVENCO ZerAx® axial flow fan was approved as an obvious choice.

Read More


 

Latest News

  • Prev
  World leaders from government and industry will meet in the southern Denmark city of ...
  The ABB #BuildtheFuture Roadshow delivers the latest electrical products, services, ...
  Global industry is accelerating its investment in energy efficiency in the next five ...
  In March 2022, the new edition of the installation standard IEC 61918:2018/AMD1:2022 ...
  On this episode of the Allied Expert Advice podcast, Carlos Riano, Senior Offer ...
  Advanced Micro Controls Inc. (AMCI) has realized growth throughout the Midwest United ...
  Ballard Power Systems recently announced that the company has launched a three-year ...
  Discover the difference a Gutor-backed setup can have on your business and ...
  Control Techniques Engineers step up to the plate, in record time, to tackle the ...
  ABB Ability™ Smart Melt Shop digitally connects all steel melt shop processes ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil