Drives and Control Solutions

Motors, Control Solutions, Power Transmission and Advanced Motion Technology                                                                 

DCS-24-Allied-MotorMaintenance-400.jpg

April 6, 2021

Small motors – both AC and DC – serve as critical points in industrial operations. They may be integral to automation and equipment control and serve multiple purposes to mechanically drive and actuate systems and equipment, but are often replaced rather than repaired or reconditioned.

Larger motors may be repaired, rewound, and sent into a motor rewind pool.  However, many motors will simply be replaced when imminent signs of failure are detected using smart equipment, instrumentation, and tools discussed below.

“Special features such as custom shaft or mounting with or without a rear shaft can make an impact on repair or replacement decisions,” explains Allen Bennett, a field application engineer with Allied Electronics & Automation.

Bennett adds that a motor’s age is telling of how easy (or difficult) it may be to replace. “Depending on how old the motor is, finding a new exact drop-in replacement could be difficult,” says Bennett. “Older motors have larger housing sizes even within the same frame. This is due to out-of-date insulation materials and lamination stacking methods. Features such as mounting holes, mounting base thickness, and shaft height from base are usually different on old verses new electric motors.

Examining these characteristics prior to buying a new motor will ensure the new motor will work in the application. Advances in insulation materials, lamination materials and bonding methods enable new motors to be smaller. Newer motors are more efficient thereby lowering electricity cost, and this could be a factor in a decision to buy new.”

It’s important to monitor the health of motors and ensure they are reliable and ready to work when needed. There are numerous ways to determine if a motor is in good material condition and running well or is degrading and losing functionality.

A smart way to monitor motor performance throughout a network of equipment is to utilize a motor maintenance checklist. While this list does not incorporate every action to detect premature motor performance, it does represent a sensible list to monitor and detect motor problems and replace them prior to failure and further detrimental effect on your operation.

Here are five areas of focus:

  •    -   Insulation breakdown and resistance. Preventive maintenance includes monitoring the insulation condition of insulated motor windings. Taking scheduled insulation resistance readings, using quality equipment, is a best practice. Such readings should be recorded archived, and all maintenance technicians should be well aware of the limits set forth by industry standards and manufacturer recommendations.
  •    -   Loose connections, cleanliness, and ground detection. Electrical breakdown is often preceded by heat. Heat is a symptom of loose connections and grounds. In addition, dust may be flammable. Therefore, it’s important to have a robust program to check for such conditions. A reliable infrared camera or device can visually indicate conditions of “hot spots” within switchboards as well as wiring, connections, controllers, and power and distribution panels. Infrared “shots” should be taken according to a disciplined schedule. Should any deficiencies be found, they should be repaired and corrected immediately.
  •    -   Misalignment and impending bearing failure. If a roller bearing is failing, has water intrusion, or another journal bearing is beginning to fail, heat and noise may be early warning signs. An infrared camera may also be used to detect heat on motor bearings. Where appropriate, bearing and shaft alignment may be checked with test instrumentation that accurately signal misalignment,
  •    -   Environmental considerations – air gap, water intrusion, physical proximity to motors and their operations. This check is more visual and may easily be incorporated during normal maintenance walkabouts and visual inspections. Notation of any conditions such as water intrusion, close quartered motors without adequate space ventilation, or any climate condition that could adversely impact motor performance are all key.
  •    -   Vibration– within the motor itself, or from the equipment or structure it is mounted to. Is there excess vibration. Excess vibration may be due to numerous factors. How much vibration is too much can be determined by understanding industry standards, manufacturer recommendations, and by taking vibration readings with a reliable tool at a disciplined interval and schedule. Limits should be set and corrective action taken for motor rebuild, repair, or replacement.


While this list is not all inclusive, it is a sensible list to check against your current maintenance program. It also is a sensible approach to ensuring that the health of your motors is acceptable and sound to fortify your uptime and reduce your downtime, due to motor issues.

Source


Editor's Pick: Featured Article


By Brian Fortney, Global Portfolio Lead, Rockwell Automation

Having a workforce that’s well trained on current technologies and equipment is critical for any manufacturer. When workers lack necessary skill sets, they are more likely to make expensive mistakes that result in costly downtime. Without proper training, employees are also less productive and have lower job satisfaction. They often feel as though they aren’t moving forward in their career and get discouraged. In addition, the correlation between well-trained workers and a safer manufacturing environment shouldn’t be overlooked.

Clearly, the importance of industrial training must be a key consideration for employers. Unfortunately, developing a workforce with necessary knowledge isn’t always easy. A variety of factors are creating a serious skills gap, and many companies are struggling to find ways to address the challenges.

Read More


 

DCS-25-Omron-DamagedIncorrectLabels-400.jpg

What drives the requirement for accurate, high-quality labels? With so much hanging in the balance for manufacturers and retailers competing on a global scale, there's no good reason to ignore the need for label quality. Mislabeled packaging could have consequences that range from wasted product to (potentially severe) consumer health issues.

Let's take a look at four major areas that illustrate the importance of ensuring the accuracy and legibility of product and packaging labels and discuss a solution that can help avoid errors.

Area 1: General product traceability

Product traceability, in a general sense, is essential for consumer safety, regulatory compliance and overall quality perception. If there’s a problem with a product, traceability allows the consumer, retailer or another entity to quickly locate and segregate defective products in the event of a recall.

Read More


 

Product News

  • Prev
As more power-sensitive devices are deployed in automated industrial processes, the need for ...
Siemens has developed an innovative enclosed IEC line with the very best product technology. By ...
Nominal Controls Inc., a Canadian manufacturer of pressure sensing and power control technologies, ...
The safe, simple, and efficient operation of three-phase asynchronous motors is an important ...
CAPAROC is your individual modular system for overcurrent protection. With many combination ...
Electronics housings from Phoenix Contact are now available with integrated touch displays or ...
Littelfuse, Inc. recently announced the 400PV Fuse series, a 2410 size, surface mount ...
The new PS9xxx buffer and redundancy modules extend the universal 24/48 V DC power supply series ...
AutomationDirect’s new 1kV ALL-FLEX MTW/THHW heavy-duty flexible power cable from Direct Wire is an ...

New Product

DCS-25-Phoenix-CAPAROC-400.jpg

CAPAROC is your individual modular system for overcurrent protection. With many combination options, intuitive operation, and simple design-in, you can create your personal standard in device protection. This system perfectly positions you for the future.

With a wide range of individual modules and many combination options, you can create your customized solution with CAPAROC. The customizable circuit breaker system is completely compatible, technologically up-to-date, and can be extended with future updates at any time, even during operation.

Experience easy operation through tool-free assembly, uninterrupted installation, and a transparent operating state: The modules can easily be snapped on, even when assembled. The easy nominal current setting and the clear identification of connections and potentials ensure intuitive operation.

Read More


 

Latest News

  • Prev
Machine safety is one of the most important requirements in factory automation and it can also be ...
Allied Electronics & Automation has strengthened its robust roster of more than 500 world-class ...
Keeping workers safe and keeping the production line going may seem contradictory, but in most ...
The design of HVAC systems poses unique challenges for things like motor control and circuit ...
ABB has provided electrification, connected control and operations management systems, ...
With interest in driverless cars increasing all the time, and with car manufacturers looking for ...
Tundra was recently excited to announce that they’re now a part of the Wajax Corporation. Be sure ...
In October of 2020, orders in the mechanical and plant engineering sector matched the previous ...
Kerrwil Publications Great Place to Work. Certified December 2019 - December 2020

538 Elizabeth Street, Midland,Ontario, Canada L4R2A3 +1 705 527 7666
©2021 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil